Often, our clients have questions, how should they use our products, how to stick, or how to prepare the surface of the sticker glue? Hurry to help you! To achieve the best results, we present to you a short and clear instructions for use.

Before applying stickers make sure surface is dry and clean. In the case of glass, a car or motorcycle body surfaces before applying it must be washed, dried and cleaned, preferably with white spirit.

Stickers are made up of 3 layers: a base of a sticker, sticker and transport films. Basis usually a sticker sticker color contrast, it is a softer surface to sticking the sticker glue. Same label, depending on its color and may be matt or glossy, mirror or reflection of light. A transparent film of the transport helps easily transfer sticker on the desired surface.Before gluing a sticker, we recommend a film more securely to the sticker just smooth down the label credit card or plastic squeegee.

Before gluing a sticker on the desired surface to be flat ground, for example table, and gently flip the sticker sticker rob base. It is necessary to ensure that all parts of the sticker remains on a transparent plastic transport film..

When the base sticker removed, pick up the sticker with both hands on top of the Carrier film and put it exactly on the desired surface. Note: in case of failure is unlikely to be re-glued sticker, so try to stick fairly and carefully.

When the sticker glued to the transport film on the desired surface, slightly pressing the credit card or plastic squeegee, wipe the transport of film, that sticker more adhesion to the adhesive surface.

At the end, slowly and carefully tear open along the transport film from the top corner down to 45 degrees, or there are no longer looking at the carrier film sticker details.

If the decal is applied, to remove air bubbles use the needle to gently squeeze air to the hole side.